Black PLA Meta Filament 1.75 mm 1Kg Spool – SunLu
د.ع 23,000
فلمنت PLA مطور مقدم من شركة سنلو. سهل الالتصاق. انسيابية اعلى بمرة ونصف من الـ PLA العادي. معامل صدمة اكبر من الـ PLA والـ PLA+. اسهل بالطباعة من الفلمنت العادي. مناسب للطابعات السريعة ايضاً.
In stock
PLA Meta from SUNLU is a modified PLA material that, thanks to its high flowability, is ideal for high-speed printing. The filament produces glossy surfaces and is therefore particularly suitable for use in art or for various DIY projects in the craft sector.
Tip: Since PLA Meta can be printed at lower temperatures, clogging and stringing can be effectively reduced.
Features at a glance:
- Outstanding layer adhesion,
- 1.5 times higher flowability compared to standard PLA,
- Higher impact strength and toughness than PLA and PLA+,
- Easier to print than PLA and PLA+,
- Up to 0.02 mm higher accuracy than standard PLA.
|
Attribute |
Value |
| Brand | SunLu |
| Diameter | 1.75mm |
| Tolerance | ±0.02mm |
| Print Temp. | 185-195℃ |
| Print speed | 50-150mm/s |
| Platform Temp. | Glue required if not heated,
Glue unrequired if heated 50-60℃
|
| Bubble | no bubble |
| Tension(kgf) | 9-12 |
| Melt Mass Flow Rate | 8-12g/10min(190℃,2.16kg)
|
| Breaking elongation | 35% |
| N.W. | 1 KG/roll |
| G.W. | 1.3KG/roll |
| Length | 1.75mm(1KG)=330m |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Filament Vacuum Bags Kit
د.ع 14,000Read moreاكياسس تجفيف الفلمنت من شركة سنلو. اكياس عدد 8 مع مضخة سحب واكياس سحب رطوبة سليكاجيل عدد 10.
-
Green PLA Filament 1.75mm 1 Kg Spool – SunLu
د.ع 21,000 -
Black PLA Filament 1.75mm 1 Kg Spool – SunLu
د.ع 21,000 -
SUNLU FilaDryer S4 Filament Dryer
د.ع 199,000Add to cartمجفف فلمنت مقدم من شركة سنلو بحجم كبير يستوعب 4 بكرات فلمنت للتجفيف مع بعض بكفاءة واتزان حراري عاليين.
-
Reviews
There are no reviews yet.