Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Out of Stock!

220×220 mm Magnetic Flexible Build Plate

د.ع 25,000

منصة طباعة مغناطيسية مرنة قياس 220×220 ملم.

Out of Stock!

Product Description:

1. The product is divided into two sides of the A.B board. Aside: High-temperature print layer B side: Low-temperature adhesive layer

2. Separate bending to take the model. It is more convenient.

3.No need for beautiful paper and scrapers to assist the model.

4. Can be installed on hotbed and glass platform.

5. Printing does not warp. No glue is needed.

6. Can be printed on a cold bed.

7. The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model

8. PC material is flame-retardant and wear-resistant. Oxidation resistance, low mold shrinkage, good dimensional stability

Note:

  1. Before sticking the b surface, be sure to wipe the surface of the hot-bed platform clean, otherwise, air bubbles will be easily generated during use! !!
  2. In order to effectively reach a good non-warped state, it is recommended that the temperature of the hotbed should not exceed 80 degrees.
  3. Before printing, please keep the platform leveling nozzle and the platform within 0.05mm, about one sheet of paper is the best thickness. After printing, please remove the model in time. If the cooling time is too long, the model’s platform adsorption will be larger.
  4. Please do not let heated nozzle touch the A plate directly !
  5. Due to the magnetic pole factor, the magnetic poles are directional when the two stickers are attracted. If the suction is unstable, please rotate side A by 90 degrees.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: OR06056 Categories: , Tag:

Cart

Your Cart is Empty

Back To Shop